• 5.0L (302 cubic inches)
• 12.0:1 compression ratio (nominal)
• Hyperuetectic  pistons with Graphal® low friction coating Piston-cooling jets, optimized oil drain back, and windage control improve high-rpm performance
• Manley® H-beam connecting rods with ARP® 2000 bolts
• Clevite connecting rod bearings
• Lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
• Large rear sump Retrofit oil pan with 10qt capacity features optimized oil drain-back and windage tray to control oil and improve high-rpm performance
• Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body
• Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction with Boss Valve Springs
• Ford Racing engine cover kit
• The Ford Racing “Coyote” Engine Control Pack includes a PCM with Ford Racing calibration, Electronic Throttle Control accelerator pedal, a unique downsized power distribution module, Air box with inlet tube, MAF sensor with bolts, and EGO sensors.
• Front Timing Cover
• Includes colder heat range zero (0) spark plugs,
• Includes Ford Racing oil filter
• Automatic Flexplate
• Vehicle harness and PCM  included, designed for street rod/project car installation.
• Remote Mount Filter Adapter  available for applications requiring oil filter relocation
• Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.
• Serpentine Kit with Brackets and Pulleys A/C and P/S available for Additional $
• Complete Heavy Duty 6R80W Automatic Transmission & controller.
  Advanced Adapters 4 x 4 output shaft, compatible with Dana 20 Transfer Case.  Includes Torque Converter, Spacer Plate & Diptube .
• High Torque Starter

Description

5.0 Coyote GEN 3 Ford Crate Engine with 6R8OW Auto Transmission 4 X 4 – Bronco Trucks

This is the Complete GEN 3 Ford Coyote Engine and Automatic Transmission Package. Ideal for a Street Rod or Hot Rod Setup. Plug n Play. Includes: Pulleys with Alternator, Wiring harness, Plastic Engine Cover, Computer, Wiring Harness, Fuel Rails, and Starter.

We are offering 5.0 Coyote GEN 3 Ford Crate Engine w/ 6R80W Auto Trans 4 X 4 – Bronco / Trucks at a very complete price, please check the Product specifications, and if you have any questions feel free to contact us.

Daily Driver with a Good Idle and Vacuum, Broad Torque range. This  Engine is a Direct replacement for your old 289, 302, or 351w. Nice upgrades and performance improvements. Roller Valvetrain. Cylinder Heads Flow exceptionally better than the old Iron Heads.  Just the right amount of classic Thump Idle sound. Will Replace most early 260, 289, 302, 351w, and later model Small Block Ford Engines. Pump Gas Friendly

1966-1976 Broncos, F100s – Early and later model Ford Trucks

For more details and Add ons Please contact us.

Additional information