• 5.0L (302 cubic inches)
• 11.0:1 compression ratio (nominal)
• Mahle® Hard Anodized  forged pistons with Graphal® low friction coating
• Manley® H-beam connecting rods with ARP® 2000 bolts
• BOSS 302 connecting rod bearings
• Lightweight aluminum cylinder block,   features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength
• Large rear sump oil pan with 8qt capacity features optimized oil drain-back and windage tray to control oil and improve high-rpm performance
• Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body
• Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction with Boss Valve Springs
• Ford Racing engine cover kit and Balancer.
• Automatic Flexplate. ( Additional Charge for Std. Flywheel)
• Includes engine injector harness and ECU
• Front Cover Installed and Harmonic Balancer
• Includes colder heat range zero (0) spark plugs,
• Includes Ford Racing oil filter
• Vehicle harness and PCM  included. This installation kit is designed for street rod/project car installation.
• Remote Mount Filter Adapter  available for applications requiring oil filter relocation

Description

5.0 Coyote / 435 HP Ford Mustang Fox Body Swap

Can be Installed into the Fox Body Mustang with modifications to the Exhaust, mounts, K member, etc.  Mustang Coyote Swap Available with Front Drive Accessory Kit – Alternator, Power Steering, or A/C where applicable. We are offering a 5.0 Coyote / 435 HP Ford Mustang Fox Body Swap at a very competitive price, please check the Product specifications, and if you have any questions feel free to contact us.

Factory Five with a Good Idle and Vacuum, Broad power range.  Nice upgrades and performance improvements.  Roller Valvetrain.  Just the right amount of classic Thump Idle sound. Pump Gas Friendly.

Direct Fit for Most Cobra Replica, Hot Rods, and Coupes.

For more details and Add ons Please contact us.